Yang Baru di “3.0″
(Bagian Keenam dari 8 Tulisan)
Oleh Thorsten Leemhuis (H-Online.Com)
Terjemah Bebas oleh Pengelola Blog http://tanyarezaervani.wordpress.com

Catatan : Baca Terlebih dahulu Bagian Kelima dari Artikel sebelum membaca bagian ini
LAN
- [
] Add Fujitsu 1000base-SX PCI ID to tg3 - [
] be2net: add rxhash support - [
] be2net: Enable SR-IOV for Lancer - [
] benet: convert to set_phys_id - [
] bnx2: convert to set_phys_id - [
] bnx2x: Allow ethtool to enable/disable loopback.
- [
] bnx2x: convert to set_phys_id - [
] cxgb3: implement set_phys_id - [
] cxgb4: drop phys_id interface and implement the newer set_phys_id - [
] cxgb4vf: drop phys_id interface and implement the newer set_phys_id - [
] e1000: convert to set_phys_id - [
] e1000e: implement ethtool set_phys_id - [
] e100: implemenet set_phys_id - [
] ethtool: Change ETHTOOL_PHYS_ID implementation to allow dropping RTNL - [
] ewrk3: convert to set_phys_id - [
] igb: convert to ethtool set_phys_id - [
] ixgb: convert to set_phys_id - [
] ixgbe: add LED blink code for x540 - [
] ixgbe: Add macvlan support for VF - [
] ixgbe: add support for 64k EEPROM for 82599 - [
] ixgbe: Add support for new 82599 adapter - [
] ixgbe: convert to ethtool set_phys_id - [
] ixgbe: enable SCTP checksum offload for X540 - [
] ixgbevf: Add macvlan support in the set rx mode op - [
] net: allow shifted access in smsc911x V2 - [
] niu: convert to new ethtool set_phys_id - [
] pcnet32: convert to set_phys_id - [
C N4] ptp: Added a clock driver for the National Semiconductor PHYTER. - [
1] qlcnic: Code optimization patch - [
] qlcnic: convert to set_phys_id - [
2] qlcnic: FW dump support - [
] qlcnic: Update version number to 5.0.16 - [
] qlge: use ethtool set_phys_id - [
] s2io: convert to set_phys_id (v2) - [
] sfc: Implement ethtool_ops::set_phys_id instead of ethtool_ops::phys_id - [
] skge: implement set_phys_id - [
] sky2: support ethtool set_phys_id - [
] stmmac: review Wol and enable the Unicast support - [
] tg3: Add 5720 ASIC rev - [
] tg3: Add 5720 H2BMC support - [
] tg3: Add 5720 NVRAM decoding - [
] tg3: Add 5720 PHY ID - [
] tg3: Add EEH support - [
] tg3: Add jumbo frame loopback tests to selftest - [
] tg3: Add support for extended VPD blocks - [
] tg3: Add TSO loopback test - [
] tg3: Allow ethtool to enable/disable loopback. - [
] tg3: Enable 5720 support - [
] tg3: implement ethtool set_phys_id - [
] tg3: Update version to 3.118 - [
] tg3: Update version to 3.119 - [
] via-rhine: Assign random MAC address if necessary - [
] vxge: always enable hardware time stamp - [
] vxge: convert to set_phys_id - [
] vxge: update driver version
Bersambung (rezaervani@gmail.com)
Berikutnya : Minor Gems – Wifi
.
Daftar Artikel Ini Selengkapnya :
- Artikel : Log Kernel : Yang Baru di “3.0″ (8) – Minor Gems – Ragam Lainnya
- Artikel : Log Kernel : Yang Baru di “3.0″ (7) – Minor Gems – WiFi
- Artikel : Log Kernel : Yang Baru di “3.0″ (6) – Minor Gems – LAN
- Artikel : Log Kernel : Yang Baru di “3.0″ (5) – Minor Gems
- Artikel : Log Kernel : Yang Baru di “3.0″ (4) – Rt2x00 Wi-Fi driver
- Artikel : Log Kernel : Yang Baru di “3.0″ (3) – Wireless
- Artikel : Log Kernel : Yang Baru di “3.0″ (2) – Ping untuk Semua Orang, Bluetooth, RealTek dan Broadcom
- Artikel : Log Kernel : Yang Baru di “3.0″ (1) – Just in Time
Leave a Reply